SV Series Model Specifications

Analyses/sec Beam Width Focus Distance X dim (min)
SV100
100
 6" (152mm) 8" (203mm) .0067" (.17mm)
SV100HD
100
 4.5" (114mm) 6" (152mm) .005" (.127mm)
SV100C
100
 10.5" (267mm) 15" (381mm) .013" (.33mm)
SV200-1
200
 2.5" (63.5mm) 8" (203mm) .0067" (.17mm)
SV200-2
200
 1.75" (44mm) 6" (152mm) .005" (.127mm)

Accessories and Options

Universal Power Supply Unit, RJS ScanVision Software, Female DB-9 to Female DB-9 Communication Cable (6 ft. (1.8 M) length), Calibration Symbol, Mounting Stand, Rastering Scan Line, Interface Kits for Zebra and Sato Printers (contact RJS for additional printer types), Power Supply/Sensor/Output Cable.

Data and Quality Parameters Available

Decoded Data, All Symbol Characters, Modulo Check Digit Analysis, Symbology Type, ANSI Method Overall Symbol Grade, ANSI Method Parameter Grades, (Reference Decode, Decodability, Modulation, Symbol Contrast, Rmin/Rmax, Defects, Min. Edge Contrast and Global Threshold), Average Bar Deviation, Ratio (if applicable), PCS, Element Reflectance (min. and max.), Quiet Zone Analysis, X Dimension, Inter-Character Gap (if applicable), No Read Flag, % decode, Partial Read Analysis, Pass/Fail Flag, Data Match (up to ten (10) fields), Increment/Decrement (base 10 and base 36).

Symbologies

USS Code 39, USS Code 128, USS Code 93, USS Codabar, USS Interleaved 2 of 5, UPC / EAN including 2 and 5 digit supplemental codes

Scanning Performance

Depth of Field – Mount at specified focus distance for most accurate verification operation.
Ladder or Picket Fence Bar Codes
Up to four (4) bar codes across

Operation Modes

Sync (edge and envelope), Freescan and ScanVision off line modes can be enabled

Physical

Package: 4.4" (112 mm) x 2.4" (61 mm) x 5.2" (132 mm)
Indications: Five (5) LED’s – Power/Sync, Calibration, Read, two (2) programmable LED’s
Comm Port: DB-9 male, RS 232C, programmable baud rate up to 115200 baud
I/O-Power: DB-15 male, five (5) programmable outputs, two (2) sync inputs
+5VDC @ 1 amp required
Mounting: Two (2) sets of mounting holes on two (2) different surfaces or a clamp for tightening to a 3/8" (9.5 mm) rod.